ABB 800xA Operation page 190

Direct I/O Displays
Access the Direct I/O Display,
display by selecting an active controller, then selecting the
and selecting Controller I/O, Alternately, you can select a direct I/O device in the
Diagnostics window of the Controller Subsystem Status display.
Figure 82. Direct I/O Display
From this display you can:
•
•
CCF can use any I/O type (Analog Input, Analog Output, Pulsed Input, Digital
Input, Digital Output and Device Loop).
190
Return to the subsystem status display using the controller context menu (right
click anywhere except in a valid CCF or TLL tag field)
Open associated CCF or TLL faceplate for a channel (click on CCF Tag or
TLL Tag for desired channel)
Figure 82, from the Controller Subsystem Status
Section 7 I/O Displays
Display Request button
3BUR002418-600 A