Register Display - ABB 800xA Operation

Register Display

Register Display
The Register Display,
that are used to store values, in the device. This display is accessed by selecting a
Ladder Logic object and then selecting MOD300 TLL Register from the context
menu.
Figure 46. TLL Register Display
The following fields can be edited on this display:
Value
Description
108
Figure 46, contains a list of the registers, places in memory
You can change the value of a register by selecting the Value
field for the register, entering the new value, then pressing
ENTER. This change is then applied.
Use this field to modify the associated description.
Section 5 TLL Displays
3BUR002418-600 A