ABB 800xA Operation page 195

Section 8 Operation Examples
Loop Faceplate (Auto/Local Mode)
Loop Faceplate (Manual/Local)
3BUR002418-600 A
Selecting and Viewing a Control Loop
Tag description could indicate that this faceplate applies
to PID control loop. The data displayed applies only to
the loop which is identified by the tag name.
[Pv] indicates the current measured value.
[Sp] indicates the current setpoint value.
[Out] indicates the current output value.
The current output high limit and low limit values are
shown on the Out bar graph scale.
PID loop is operating in automatic with local setpoint
[LOC].
To adjust local setpoint from the faceplate, use the
setpoint slider or the [Sp] entry field.
Tag name could indicate that this faceplate applies to a
PID control loop.
Current process temperature [Pv] is 31.72° C.
Current value of output in percent is being displayed
[Out] 67.99.
Loop is operating in manual with local setpoint [LOC],
and Feedback [FB].
To adjust output in manual, use output slider or the [Out]
entry field.
195