ABB 800xA Operation page 177

Section 7 I/O Displays
PROFIBUS Module/Channel Header Area
At the top of the display there is a section related to the addressing of the I/O
module as described below.
Module Address Info
Devsub
State
Lan
Device
Module
Templet
Label
State (Module)
3BUR002418-600 A
The controller DCN address where the device is located.
This field shows the status of the controller as ACTIVE
or DOWN.
This field represents the number of the Local Area
Network (LAN) for the AC 460 device shown (can be 1 to
4). Go back to the controller display to select a different
LAN.
This field represents the device number.
Go back to the LAN display to select a different device.
This field represents the module number.
Go back to the device display to select a different
module.
The logical device name created during database
configuration is given in this field.
Descriptive label associated with templet.
This field shows the status of the module.
ACTIVE indicates the module is OK.
FAILED means the module has stopped.
MISSING means there is no module installed.
Module/Channel Display
Description
177