ABB 800xA Operation page 164

S100 Device Status Display
Figure 72. S100 I/O Device Status Display
The following is a description of the fields on the S100 I/O Device display. See the
S100 overview heading descriptions for Devsub, State, Name and Lan. See the S100
overview column heading descriptions for Device, Templet, Dev Type, Comm Addr,
and Dev State.
Channel
CCF Tag
and
TLL Tag
164
The input (IN) or output (OUT) and channel number of the device.
If the value is green, the Data Quality is good.
If the value is red, the Data Quality is bad.
The TAG is the name of the CCF loop or the TLL device that uses
the channel. If no loop or device is assigned to the channel then
the field is blank.
Select the CCF or TLL Tag target area to get the appropriate MOD
Faceplate.
If a tag is configured for warmstart and is warm started, it is shown
with a white background.
Section 7 I/O Displays
3BUR002418-600 A