ABB 800xA Operation page 224

Device Loop Templet
ALARM PRIORITY Field
This field specifies the priority level for any alarms occurring for the device.
Valid entries are:
HIGH
MED
STD
POSTING ENABLE Field
This field indicates whether posting is enabled for the loop. Posting affects the way
alarm information is presented at the Operator Stations or Multibus-based consoles
and on the Alarm/Event Log.
Valid entries are:
YES
NO
SUPPRESS ALARMS Field
This field specifies whether the loop processor checks to see if the alarms defined by
this loop are active.
Valid entries are:
YES
NO
DEVICE OVERRIDE Field
This field overrides the feedback timer. When set to YES, there are no Timeout
Alarms for the device. See the description of the TIMER field for a description of
Timeout Alarms.
Valid entries are:
NO_CHECK
224
high (priority 1)
medium (priority 2)
standard (priority 3)
enable posting
disable posting
suppress alarms (do not check)
do not suppress alarms
override the feedback timer
Appendix A Runtime Templates
3BUR002418-600 A