ABB 800xA Operation page 83

Section 4 TCL Displays
Functions for sequence mode are:
AUTO
SEMI_AUTO
MANUAL
The semiautomatic mode and manual mode support troubleshooting and debugging
sequences.
Functions for sequence status are:
NORMAL
ABNORMAL
Removing one or more Sequences
To remove a sequence from the unit, first select (highlight) the sequence (or list of
sequences) to be removed, then click on the REMOVE SEQUENCE button.
Selecting a Specific Sequence for SFC, Sequence Detail, or Debug
Display
3BUR002418-600 A
Changing Sequence State, Mode, and Status
Programs execute steps in order without requiring operator
intervention.
Programs execute steps automatically, but pause at
configured breakpoints. The operator can then resume or
abort.
Programs execute manually.
Indicates that no abnormal conditions exist. Normal is the
default mode after downloading.
Indicates that an abnormal condition exists. The number to
the right of ABNORMAL defines the type of condition. See
Taylor Control Language (TCL) for AdvaBuild User's Guide
for information about the abnormal conditions.
To select a specific sequence for SFC, Sequence Detail,
or Debug display, select the Sequence ID, right click for
the context menu and select the SFC, Sequence Detail
Display or Sequence Debug Display.
83