Subsystem Status Displays - ABB 800xA Operation

Subsystem Status Displays

the status of Control Modules 1 through 12. ADVANT STATION icons contain two
status boxes that indicate the status of the Real Time Accelerator Board. AC410 and
AC460 icons contain two status boxes that indicate the status of the DCN interface
submodules, and AC460 icons have up to three additional status boxes that indicate
the status of controllers.
State Definitions
The system state executive indicates the current status of a device or subdevice
through the following state definitions:
ACTIVE
AVAILABLE
DOWN
HOLD
IMPAIRED
READY
UNKNOWN
Subsystem Status Displays
The Subsystem Status Displays provide information on the node's condition.
124
STATE COLOR
Blank
Green
Cyan
Red
Cyan
Cyan
Yellow
Red
Table 6. State Definitions
No Control Module configured.
Device or subdevice is running.
Program has downloaded and database is
downloading.
Fatal failure (that is, communications has failed)
or device/subdevice may be down.
Hardware error (that is, digital input, analog
input) or configured hold to allow other Control
Module with softwired data to become active.
Backup Control Module running but is not yet
rebooted.
Database download is complete; normal state
for backup controller.
State is not known.
Section 6 Status Displays
DEFINITION
3BUR002418-600 A