Process Bar Graphs and Values
Status Area
Figure 10. Faceplate Name Area Features
Process Bar Graphs and Values
The area shown in
tag being monitored. The bar graph area includes scaled indication bars for
measured value (Pv), setpoint (Sp) and output (Out); slider controls to change
setpoint and output; and alarm markers. The number area includes measured value
(Pv), setpoint (Sp), control output (Out), setpoint high and low limits and ratio (Ra)
and bias (Bi) values. You can use the number area to enter a value for operator
controllable values (configured limits are enforced). Alarms are indicated using
colored backgrounds for priority, flashing for unacknowledged, and the characters H
(high), L (low), D (Deviation), R (Rate) and ? (Bad Data Quality) in front of the
display value. Infinite values will show ?Inf (variations shown on other displays
such as ?1.#IO for status blocks or 1.$e+000 for Loop FCM). The background color
corresponds to the priority color of the highest priority alarm currently active.
40
Auto/
Computer
Manual
/ Local
or
Mode
Output Track
Figure 11
contains graphical and numerical representations of the
Tag
Loc/Rem
Loc/Rem
Track
Bias
or Ramp
Setpoint
Section 3 CCF Displays
Alarm Acknowledge
Loc/Rem
Abnormal
Ratio
State
3BUR002418-600 A