ABB 800xA Operation page 113

Section 5 TLL Displays
The following fields can be edited on this display:
Preset
Value
Enable
Description
Time entries can be made in the following formats:
•
•
•
3BUR002418-600 A
The Preset and Value fields are displayed to the hundredth
place. For example, 001:20:15.25 is one hour, twenty
minutes, fifteen and twenty-five hundredths seconds. Your
entry should be within the resolution of the time base. If it is
not, the system automatically rounds it to the nearest
multiple of the time base. You can change the preset or
value of a timer by selecting the Preset or Value field for the
timer, entering the new value, then pressing ENTER. The
changes are logged.
This field is used to enable and disable the timer. You can
change between YES (enable) and NO (disable) by
selecting the Enable field for the timer, clicking on the
appropriate Enable button, then pressing ENTER. The
changes are logged.
Use this field to modify the associated description.
One colon preceded by one or two digits means minutes and seconds.
Examples:
30:05
12:40
One colon preceded by three digits means hours and minutes.
Example:
010:15
Two colons indicate hours and minutes.
Examples:
8:07:
12:16:10.2
30 minutes 5 seconds
12 minutes 40 seconds
10 hours 15 minutes
8 hours, 7 minutes
12 hours, 16 minutes, 10.2 seconds
Timer Display
113