Changing Recipe Values; Tcl Array Plot Display; Tcl Array Plot Format; Using Tcl Array Plot - ABB 800xA Operation

Changing Recipe Values

Changing Recipe Values
Only recipe values can be changed from the Recipe Detail Display. To edit a recipe
value, select the parameter you want to change, type a new value and press Enter.
Any changes to recipe values from the Recipe Detail Display are not permanent.
The changes are temporary and only apply to the current batch.

TCL Array Plot Display

There are two primary ways plot display are configured: the Plot and the Filled Plot.
The Plot display shows data contained in a TCL array as a contiguous trace. As
many as two traces of data can be plotted at one time. The Filled Plot configuration,
Figure

TCL Array Plot Format

Plot displays require a TCL floating point array to store the configuration attributes
and plot point values. The array must be large enough to store values for all the
points to be plotted.
Plots and filled plots can have vertical blue lines drawn at user-specified locations.
Plots of this type are called Hybrid Plots. Hybrid plot displays are useful for flat
sheet applications. A TCL hybrid line array is required for the hybrid plot display.
The hybrid line array is a TCL real number array that is 260 elements long.

Using TCL Array Plot

When using the In Plot Array option, the first 10 elements of the array are used as
the plot display's attribute values. All other elements of the array may contain the
plot point values. The points are drawn on the array plot display consecutively from
left to right. Therefore, it is important that you enter the values for the plot points in
the proper elements of the array.
The plot array may give you an inaccessible error on first use. Also, anything that
causes a disconnect with the Connectivity Server will cause error values. Upon
reconnect, inaccessible errors will occur.
98
42, is a single trace, filled with a color between the x-axis and the trace line.
Section 4 TCL Displays
3BUR002418-600 A