S800 Device Display - ABB 800xA Operation

S800 Device Display

S800 Device Display
The S800 Device display is started by selecting a configured I/O device from the
S800 Station Display. The S800 Device display,
the device and each channel configured for the S800 I/O module (device diagnostics
are not displayed). Use the context menu to move up to the station and LAN
displays. From this display you can:
•
•
•
•
Figure 70. S800 Device Status Display
156
Change channel output value.
Select loop CCF tag and start loop faceplate.
Select TLL point tag and start TLL faceplate.
Select device configuration display.
Section 7 I/O Displays
Figure 70, shows information for
3BUR002418-600 A