ABB 800xA Operation page 158

S800 Device Display
The next section gives information about the I/O module selected.
Templet
Label
Revision
Config Type
Actual Type
Dev State
The channel window section shows specific information about each channel of the
module. A scroll bar is used to view other channels of the device. For each channel,
several columns of information are displayed as described below.
Channel
CCF Tag
and
TLL Tag
158
The device name created during database configuration is given in
this field.
This field shows the label given this I/O module.
Gives the revision level of the module if available.
This field shows the I/O module type that was configured for this
device number.
This field shows the actual I/O module type that is inserted in this
device number location.
This field shows the status of the I/O module. ACTIVE indicates
the I/O module is OK. FAILED means the I/O module has stopped.
MISSING means there is not an I/O module installed.
The input (IN) or output (OUT) and channel number of the device.
The text color for each channel is based upon the reporting of
faults and the data quality:
Dark Green = Report faults is yes and data quality is good.
Red = Report faults is yes and data quality is bad
Light Green = Report faults is no, data quality is forced to
'good'
The TAG is the name of the CCF loop or the TLL device that uses
the channel. If no loop or device is assigned to the channel then
the field is blank.
Select the CCF or TLL Tag target area to get the appropriate MOD
Faceplate. If a tag is configured for warmstart and is warm started,
it is shown with a white background.
Section 7 I/O Displays
3BUR002418-600 A