Introduction; This Manual; Use Of Symbols; Related Documents - ABB MicroSCADA Pro SYS 600C 2.93 Product Manual

SYS 600C 2.93
2
2.1
2.2
2.3
6
MicroSCADA Pro
Product Guide

Introduction

This manual

This manual provides product information on the Compact System SYS 600C (later
referred to as SYS 600C). It gives an overview of the product functionality, key bene ts,
application areas, technical details, and capacity and performance.

Use of symbols

This publication includes warning, caution and information symbols where appropriate
to point out safety-related or other important information. It also includes tips to point
out useful hints to the reader. The corresponding symbols should be interpreted as follows:
Warning icon indicates the presence of a hazard which could
!
result in personal injury.
Caution icon indicates important information or a warning
related to the concept discussed in the text. It might indicate
the presence of a hazard, which could result in corruption of
software or damage to equipment/property.
Information icon alerts the reader to relevant factors and
conditions.
Tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, and caution hazards are
associated with equipment or property damage, it should be understood that operation
of damaged equipment could, under certain operational conditions, result in degraded
process performance leading to personal injury or death. Therefore, comply fully with
all warnings and caution notices.

Related documents

Name of the document
SYS 600 9.3 IEC 61850 System Design
SYS 600 9.3 Installation and Administration Manual
1MRS757729
Document ID
1MRS756664
1MRS756634