ABB 800xA Operation page 187

Section 7 I/O Displays
TRIO Block Header Area
The heading fields on the TRIO Block display are described below.
Devsub
State
Lan
Block
TRIO Block Status Area
The TRIO Block status area represents the block as described below.
Templet
Block Status
Config Type
Actual Type
3BUR002418-600 A
The controller DCN address where the TRIO is located.
This field shows the status of the controller as ACTIVE or DOWN.
This field represents the number of the Local Area Network (LAN)
for all the stations shown. For the AC 460, this is LAN # 1 - 4. For
the SC Controller, this is LAN # 1 - 2.
Go back to the controller display to select a different LAN.
This field identifies the block by its number, 1 to 30. Return to the
TRIO LAN Display to select another block.
This field contains the name assigned to the block templet for this
block.
There are four possible block states:
ACTIVE
INACTIVE
FAILED
INIT FAIL - failure to initialize
This field indicates the type of block templet configured for the
block.
This field contains the actual block type.
Use the context menu on this field to
Activate (make block status ACTIVE) or
Deactivate (make block status
INACTIVE) the block.
TRIO Block Display
187