Section 5 TLL Displays
File Display
Each file in the device has a File Display which lists up to 128 values for use by the
sequencer,
object and then selecting MOD300 TLL File from the context menu and then
selecting a specific file from the File List.
Figure 54. File Display
Use the drop down file list to switch to a display for another file in the device. Select
the Value field to change the values of the items in the file. All changes are logged.
When changing a value, type in the new value and press ENTER. The maximum
value allowed is an eight digit integer. For control purposes, 16777215 (FFFFFF
hex) is the full access upper value. During TLL execution, the sequencer
instructions translate the entry into a bit pattern to load into or compare with I/O
points. It is possible to see values beyond what you can enter here because the
3BUR002418-600 A
Figure
54. This display is accessed by selecting a Ladder Logic Device
File Display
117