Self-Test
– Always ensure that the self-test passes before proceeding with any
NOTE
– If all tests pass, you have a high confidence (~90%) that the N432A is
The N432A troubleshooting mode self-test can be accessed via the front panel or
remotely. The front panel softkey menu allows you to run individual test, whereas
the remote command runs a full instrument self-test as listed in
on page 36.
Front panel selection of self-tests
Press
of the following tests:
– Instrument Self-Test
– Keyboard
– Bitmap Displays
– RTC Battery
Instrument self-test
When
the same tests run using the
– Test Point Voltages
– Calibrator
– Fan
– RTC Battery
– V
Keysight N432A Service Guide
performance verification test or adjustment.
operational.
>
1 of 2
>
Service
Instrument Sel f Test
Path
RF
>
Sel f Test
to access the Sel f Test menu that consists
is selected, the following tests will be run: (These are
command.)
*TST?
Calibration Procedures
"Remote testing"
2
33