Comtech EF Data CDM-750 Installation And Operation Manual page 69

CDM-750 Advanced High-Speed Trunking Modem
Updating Firmware
D. Use Windows Command‐line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS‐DOS Prompt
icon from the Main Menu).
•
Next, open a Command‐line window...
o For Windows 95 or Windows 98, type "command".
o For any Windows OS versions later than Windows 98, type "cmd" or
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command‐line prompt (c:\>), type "mkdir temp" or "md
There should now be a "temp" folder created and available for placement of the firmware file
download.
"command".
Prompt.
temp" (mkdir and md stand for make directory), and then click [OK].
4–5
Revision 2
MN-CDM750