Appendix H.  Fec (Forward Error Correction - Comtech EF Data CDM-750 Installation And Operation Manual

Advanced high-speed trunking modem
Hide thumbs Also See for CDM-750:
Table of Contents

Advertisement

CDM-750 Advanced High-Speed Trunking Modem
Introduction
DVB‐S2 Receiver: The CDM‐750 supports DVB‐S2 QPSK, 8PSK, 16APSK, and 32APSK modulation/ 
demodulation  up  to  63  Msps  with  receive  data  rates  up  to  169  Mbps  depending  on  the 
modulation type and code rate. 
 
In  DVB‐S2  operation,  the  receiver  operates  in  the  CCM  and  ACM  modes.  The  receiver 
automatically detects for pilots ON/OFF and supports spectral rolloff of 20%, 25% or 35%. 
Sect. 1.3 CDM‐750 Features 
Sect. 1.4 CDM‐750 Specifications 
Appendix H. FEC (FORWARD ERROR CORRECTION) 
Verification:  The  CDM‐750  includes  many  test  modes  and  loopbacks  for  rapid  verification  of 
the  correct  functioning  of  the  unit.  Of  particular  note  is  the  IF  loopback,  which  permits  the 
user to perform a quick diagnostic test without having to disturb external cabling. 
 
During  the  loopback,  all of  the  receive  configuration  parameters  are  temporarily  changed  to 
match those of the transmit side, and an internal RF switch connects the modulator output to 
the  demodulator  input.  When  normal  operation  is  again  selected,  all  of  the  previous  values 
are restored. 
 
Monitor  and  Control  Interfaces:  The  unit  is  managed  through  multiple  interfaces  providing 
options for both in‐band and out‐of‐band monitor and control. 
 
Chapter 5. FRONT PANEL OPERATION 
Sect. 6.3  (ETHERNET‐BASED PRODUCT MANAGEMENT) SNMP Interface 
Sect. 6.4 (ETHERNET‐BASED PRODUCT MANAGEMENT) Telnet Interface 
Sect. 6.5 (ETHERNET‐BASED PRODUCT MANAGEMENT) Web Server (HTTP) 
Interface 
Chapter 7. SERIAL‐BASED REMOTE PRODUCT MANAGEMENT 
 
On‐site Firmware Updates: Field update of the operating system firmware is possible through 
file upload via satellite or the Ethernet port.  
Chapter 4. UPDATING FIRMWARE  
 
On‐site  Operational  Upgrades:  Field  activation  of  software‐based  options  is  possible  through 
Comtech's FAST (Fully Accessible System Topology) Feature upgrade process. 
Appendix A. FAST OPTIONS AND ACTIVATING PROCEDURE 
 
Table 1‐1 shows the FAST and FAST‐accessible hardware options available for the CDM‐750.  
1–3
Revision 2
MN-CDM750

Advertisement

Table of Contents
loading

Table of Contents