Table of Contents
Advertisement
Chapter 7. SERIAL-BASED REMOTE PRODUCT
7.1
Introduction
1. To proceed with Serial‐based Remote Product Management, assumptions are made that:
•
The CDM‐750 is operating with the latest version firmware files.
•
The CDM‐750 is connected to a user‐supplied, Windows‐based PC, and:
o The PC serial port is connected to the CDM‐750 rear panel 'REMOTE' port using a user‐supplied serial cable.
o The PC Ethernet port is connected to the CDM‐750 rear panel 'J4 | MGMT' 10/100 BaseT Ethernet port with a
o The PC is running a terminal emulation program (for operation of the CDM‐750 Serial or Telnet Interface), and
•
The CDM‐750 Management IP Address has been noted using the CDM‐750 Serial Interface.
user‐supplied hub, switch, or direct Ethernet cable connection.
a compatible Web browser (for operation of the CDM‐750 Web Server Interface).
MANAGEMENT
7–1
Advertisement
Table of Contents
Need help?
Do you have a question about the CDM-750 and is the answer not in the manual?
Questions and answers