Installing/mounting
4.2 Installing/mounting the device
4.2.8
Remote mounted lid with extension cable
The optional blank lid can be mounted remotely up to 5 m from the device. The optional
extension cable can be used for such an installation.
1. Remove lid from the enclosure.
2. Connect the extension cable to the display connector on the terminal board and secure
under retaining clips. (If desired, attach second extension cable to the other end of the first
extension cable.)
①
②
③
④
⑤
24
WARNING
Loss of protection
Loss of protection can result from improper installation.
• The blank lid of the remote panel mount version must be installed in an additional
enclosure having Type 4X, IP65 ratings, to maintain all approvals.
Cable entry cutout
Blank lid
Extension cable
Display cable connector
Extension cable (2.5 or 5 m in length), to be connected to remote display lid
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA