Table 10-2: Basic Parameters - Settings - Siemens SIMATIC ET 200pro Quick Manual

Protection against voltage failure (can only be parameterized for high feature motor
starters)
You use this parameter to retain the last overload signal
• Overload
• No overload
10.2.2 Parameter settings
The following table shows the settings of the basic parameters:
Rated operating current
Load type
Protection against voltage failure
1) Rated power of the motor at 400 V AC
Table 10-2: Basic parameters – settings
10-4
Device parameters
)
Default Adjustment range
Increment: 10 mA
2.0 A 0.15 A to 2.0 A
12.0 A 1.5 A to 12.0 A
3-phase 3-phase / 1-phase
Yes Yes / No
SIMATIC - ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04