Section 2 Instruction Descriptions; Tables And Symbols - Hitachi H8/300H Series Programming Manual

Section 2 Instruction Descriptions

2.1 Tables and Symbols

This section explains how to read the tables describing each instruction. Note that the descriptions
of some instructions extend over two pages or more.
Mnemonic (full name): Gives the full and mnemonic names of the instruction.
Type: Indicates the type of instruction.
Operation: Describes the instruction in symbolic notation. (See section 2.1.2, Operation.)
Assembly-Language Format: Indicates the assembly-language format of the instruction. (See
section 2.1.1, Assembler Format.)
Operand Size: Indicates the available operand sizes.
Condition Code: Indicates the effect of instruction execution on the flag bits in the CCR. (See
section 2.1.3, Condition Code.)
Description: Describes the operation of the instruction in detail.
Available Registers: Indicates which registers can be specified in the register field of the
instruction.
Operand Format and Number of States Required for Execution: Shows the addressing modes
and instruction format together with the number of states required for execution.
Notes: Gives notes concerning execution of the instruction.
35