2) Stc (W) - Hitachi H8/300H Series Programming Manual

2.2.58 (2) STC (W)

STC (STore from Control register)
Operation
CCR → (EAd)
Assembly-Language Format
STC.W CCR, <EAd>
Operand Size
Word
Description
This instruction copies the CCR contents to a destination location. Although CCR is a byte
register, the destination operand is a word operand. The CCR contents are stored at the even
address.
Available Registers
ERd: ER0 to ER7
Condition Code
I UI H
— — — — — — — —
H: Previous value remains unchanged.
N: Previous value remains unchanged.
Z: Previous value remains unchanged.
V: Previous value remains unchanged.
C: Previous value remains unchanged.
175
Store CCR
U N Z V C