Renault Laguna III Manual page 3197

FRONT LOWER STRUCTURE
Front side member, centre section: Description
There is only one way of replacing this part:
- complete replacement.
IMPORTANT
Use a repair bench to ensure the positioning of the
points and the geometry of the axle assemblies.
I - COMPOSITION OF THE SPARE PART
No. Description
(1) Front side mem-
ber centre sec-
tion
II - PART FITTED
124612
Type Thick-
ness (mm)
Very 4
high
yield
strengt
h
124628
41A-23
Note:
For a detailed description of welded connections,
see MR 400.
III - POSITIONING OF LOCAL ELECTRICAL
EARTHS
WARNING
To avoid damaging the vehicles electric and elec-
tronic components, the earths of any wiring harness
near the weld area must be disconnected.
The earth of the welding machine must be placed
as close as possible to the weld area (see MR 400).
41A
121956