Identity Object - Siemens SIRIUS 3RW5 Equipment Manual

Appendix
A.5 Identity Object
A.5

Identity Object

The "Identity" object allows the identification of the EtherNet/IP device and also provides
general information via the EtherNet/IP device.
The following information applies to the Identity Object of the 3RW5 EtherNet/IP
communication module:
● Class code: 0x0001
● Class attributes: 1 ... 3
● Number of instances: 1
General services
Service code
Class
0x01 Yes
0x05 No
0x0E Yes
Class attributes
Attribute ID
1
2
3
Instance attributes
Attribute ID Access
1 Get
2 Get
3 Get
4 Get
5 Get
6 Get
7 Get
104
Available service
Instance
Yes
Yes
Yes
Access
Get
Get
Get
Instance attribute Data type
Vendor ID UINT
Device Type UINT
Product Code UINT
Revision STRUCT of
Major Revision USINT
Minor Revision USINT
Status WORD
Serial Number UDINT
Product Name SHORT_STRING -
Character string length USINT
ASCII character string STRING
Service
Get_Attributes_All
Reset
0: Restart
1: Factory settings
Get_Attributes_Single
Class attribute
Revision
Max Instance
Number of Instance
Value / comment
0x04E3 (SIEMENS)
0x000C (Communication Adapter)
0x07D0
Firmware version Vx.y.z
Bit 7 ... 4 = x, bit 3 ... 0 = y
Bit 7 ... 0 = z
See the table below
Bytes 3 to 6 of the MAC address
0x11 (17 characters)
3RW59 ETHERNET IP
SIRIUS 3RW5 EtherNet/IP communication module
Equipment Manual, 03/2020, A5E45131885002A/RS-AB/002
Description
Supplies the contents of all attributes.
-
Performs a restart of the
3RW5 communication module.
Restores the factory settings.
Supplies the contents of one attribute.
Data type
UINT
UINT
UINT