Kyocera TASKalfa 6501i Service Manual page 640

11. Unhook the hook and remove the sepa-
ration pulley (left) from the axle.
12. Clean or replace the forwarding pulley
(left), paper feed pulley (left) and sepa-
ration pulley (left).
13. Refit the forwarding pulley (left), paper
feed pulley (left) and separation pulley
(left) to the primary paper feed unit.
*: Make sure that the collars are properly
installed by checking its color.
Forwarding pulley (left) (Collar is white.)
Paper feed pulley (left) (Collar is white.)
Separation pulley (left) (Collar is black.)
14. When the forwarding pulley (left), paper
feed pulley (left) or separation pulley
(left) is replaced, perform maintenance
mode U903 (clearing the jam counter)
(see page 1-3-186).
Execute Maintenance Counter - Cas-
sette - Counter Clear of U251 (Mainte-
nance counter limits/clear) (see page 1-
3-133).
Hook
Paper feed
pulley (left)
Forwarding
pulley (left)
Figure 1-5-45
1-5-28
2N8/2N7