Switching Between Double And Single Counts; Selecting The Timing For Copy Counting - Kyocera TASKalfa 6501i Service Manual

Hide thumbs Also See for TASKalfa 6501i:

Table of Contents

Switching between double and single counts

Switches the count system for the total counter and other counters.

Used to select, according to the preference of the user (copy service provider), if A3/Ledger

paper is to be counted as one sheet (single count) or two sheets (double count).

1. Press the start key.

2. Select the item to set.

3. Select the count system.

DBL(A3/Ledger)

Initial setting: DBL(A3/Ledger)

4. Press the start key. The setting is set.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Changes the copy count timing for the total counter and other counters.

To be set according to user request.

1. Press the start key.

2. Select the copy count timing.

Initial setting:

3. Press the start key. The setting is set.

Press the stop key.

* : The screen for selecting a maintenance item No. is displayed.

Count system of black/white mode

Single count for all size paper

Double count for A3/Ledger size or larger

Double count for B4 size or larger

Double count for Folio size or larger

When secondary paper feed starts

When the paper is ejected

Show Quick Links

Table of Contents

Taskalfa 8001i