Kyocera TASKalfa 6501i Service Manual page 435

Code Contents
1350 SM multi feed sensor error
(side multi tray)
The SM multi feed sensor has
detected multi feeding 5 times
successively.
1400 Rotary guide motor error
The guide sensor is not
detected to be on at the home
position detection with the
rotary guide for three times in
a row.
1410 Rotary de-curler error
If the de-curler won't turn On/
Off despite it has been acti-
vated for 400 steps during
waiting for the de-curler sen-
sor to be On/Off three times in
a row (3 times in succession).
Related parts
SM multi feed
sensor
SM main PWB
Replace the PF main PWB (Refer to the
service manual for the paper feeder).
Rotary guide motor
BR PWB
Replace the BR PWB.
Rotary de-curler
motor
BR PWB
Replace the BR PWB.
1-4-75
Check procedures/
corrective measures
1. Check that the sensor is correctly
positioned.
2. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
SM multi feed sensor and SM main
PWB (YC11)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the SM multi feed sensor.
1. Check the rotary guide and drive gear
can rotate or they are not unusually
loaded and, if necessary, replace.
2. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Rotary guide motor and BR PWB (YC5)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the rotary guide motor.
1. Check the rotary de-curler and drive
gear can rotate or they are not unusually
loaded and, if necessary, replace.
2. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Rotary de-curler motor and BR PWB
(YC5)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the rotary de-curler motor.
2N8/2N7