Internet Fax Kit; I-Fax Settings; Accessing Command Center Rx - Kyocera TASKalfa 6501i Service Manual

(2) Internet FAX Kit

Activating the Internet FAX Kit sends and receives faxes via the Internet without using a phone line.
It can only be added when the FAX Kit is installed.
*: To install the optional function, you need the License Key.
Issue of License Key requires the "Machine No" indicated on your machine, and "product ID."
Installation Procedure
1. Press the System menu key and then press [System/Network]. If user login administration is disabled, the
user authentication screen appears. Enter your login user name and password and then press [Login]. For
this, you need to log in with administrator privileges.
2. Press [Next] of Optional Function.
3. The optional function screen is displayed. Select "INTERNET FAXKIT(A)" and press [Activate].
4. The license key entry screen is displayed. Enter the license key using the numeric keys and press [Offi-
cial].
5. The confirmation screen appears. Confirm the product name "INTERNET FAXKIT(A)" and press [Yes].
Follow the onscreen instructions to turn the Main Power Switch off.

i-FAX Settings

To send and receive Internet faxes, you must first specify the SMTP server and POP3 server settings.
Specify these settings using Command Center RX on a computer that is connected to this machine via a net-
work.
Refer to the machine's Operation Guide for information on the network settings.

Accessing Command Center RX

1. Launch your Web browser.
2. In the address or location bar, enter the
machine's IP address or the host name.
Examples: 192.168.48.21/ (for IP address)
MFP001 (if the host name is "MFP001")
*: When connecting to Command Center RX, a message may appear that reads "There is a problem with
the security certificate of this website". To prevent this message from appearing, in "Protocol Settings",
set "HTTP" to [On], or install the device certificate of this machine into your Web browser. For details,
refer to the machine's Operation Guide.
3. Enter the user name and password of the administrator, and click Login.
*: Setting Administrator User Name, and Password restricts general users' access to pages other than the
Start page. For security purposes, setting the Administrator password is highly recommended. The
default Administrator password is factory-set as 'Admin'.
4. Click 'Function Settings' from the navigation bar on the left to view and set values for that particular
category.
5. Click 'FAX / i-FAX'.
The Transmit Settings dialog box will appear.
*: For details, refer to the Command Center RX User Guide.
Figure 1-2-170
1-2-115
2N8/2N7-2