Adjusting Main High Voltage - Kyocera TASKalfa 6501i Service Manual

Hide thumbs Also See for TASKalfa 6501i:

Table of Contents

Adjusting main high voltage

Controls the charger roller voltage to optimize the surface potential.

To change the setting value to adjust the image if an image failure (background blur, etc.) occurs.

1. Press the start key.

1. Select an item and press the start key.

Set AC Auto Adj

Set Low Temp

Set Charger Freq

Setting: [Adj AC Bias]

1. Change the value using the +/- or numeric keys.

Increasing the setting makes the image lighter; decreasing it makes the image darker.

The values set vary depending on environments.

2. Press the start key. The value is set.

Setting: [Set AC Auto Adj]

1. Select On or Off.

Initial setting: On

2. Press the start key. The setting is set.

Main charger AC bias

Setting the AC bias auto adjustment

Main charger DC bias

Additional surface potential

Pre-charge time at power supply ON

Setting the main charger frequency

Rush current display

Main charger AC bias for black

Turn auto adjustment ON

Turn auto adjustment OFF

Setting range

Show Quick Links

Table of Contents

Taskalfa 8001i