Set Dc Bias; Adj Dc Bias; Set Low Temp; Set Charger Freq - Kyocera TASKalfa 6501i Service Manual

Item No.
U100 Displaying: [Set DC Bias]
1. The current setting is displayed.
DC1 Bias(K)
DC1 Bias Half(K)
Setting: [Adj DC Bias]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
* : Increasing the setting makes the image lighter; decreasing it makes the image darker.l
Display
DC2 Bias(K)
DC2 Bias Half(K)
3. Press the start key. The value is set.
Setting: [Set Low Temp]
1. Change the value using the +/- or numeric keys.l
Display

Set Low Temp

2. Press the start key. The value is set.
Setting: [Set Charger Freq]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.ll
Display
Generally
3. Press the start key. The value is set.
Displaying: [Chk Current]
1. The current setting is displayed.
K
Completion
Press the stop key. The screen for maintenance item No. is displayed.
Display
Main charger DC bias for black (full speed)
Main charger DC bias for black (half speed)
Main charger DC bias for black (full speed)
Main charger DC bias for black (half speed)
Pre-charge time at power supply ON
Description
Main charger frequency
Display
Black rush current
Description
Description
Description
Description
Setting
range
7500 to
11280
Description
1-3-70
Setting
range
128 to 127 0
128 to 127 0
Setting Initial
range setting
0 to 6 1
Initial setting
65ppm 80ppm
8745 9160
2N8/2N7
Initial
setting