Firmware Update (Security) - Kyocera TASKalfa 6501i Service Manual

Hide thumbs Also See for TASKalfa 6501i:

Table of Contents

Firmware Update (Security)

Used to execute FW-Update from the USB flash device while Very High is selected in the Secu-

rity Level settings under the System Menu.

Firmware upgrading is initiated by a service person to conduct U025 while a USB flash device is

1. Press the start key.

2. Press [Execute].

3. Press the start key.

4. Firmware upgrading will begin when power is toggled off and on after the message to urge

power toggling is displayed.

5. After the firmware upgrade is completed normally, "FW-UPDATE Completed" will be dis-

played with the firmware version.

* : This is not executable when a USB has not been installed.

Show Quick Links

Table of Contents

Taskalfa 8001i