Kyocera TASKalfa 6501i Service Manual page 326

Item No.
U425 Setting: [DP]
* : This setting is usually unnecessary.
1. Press the start key.
2. Enters the value that is indicated on the
face of the chart using the +/- keys or
numeric keys.
Display
Lead
Main Scan Measure the distance from the left edge to
Sub Scan
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Measure the distance from the leading edge
to the black belt (inside) of the original
the black belt (inside) of the original
Measure the distance from the black belt of
leading edge (inside) to the black belt of
trailing edge (inside) of the original
B
Original for adjustment (P/N: 302AC68243)
Description
DP DP
Lead
15.0
Main Scan 15.0
Sub Scan 390.0
Setting range
14.0 to 16.0
14.0 to 16.0
388.0 to 392.0 390.0
C
Figure 1-3-59
1-3-172
2N8/2N7-3
Figure 1-3-58
Initial
setting
15.0
15.0
A
Change
in value
per step
0.1mm