Kyocera TASKalfa 6501i Service Manual page 704

4. Remove the lock spring from the USB
connector.
5. Remove two screws and then remove
the USB wire (connector).
6. Release three wire saddles.
7. Remove the wire holder.
8. Remove three connectors.
9. Remove four screws and then remove
the operation unit.
Wire saddle
Wire saddle
Wire holder
Wire saddle
Screws
USB wire
(connector)
Lock spring
Operation unit
Screws
1-5-92
Connectors
Figure 1-5-145
Figure 1-5-146
2N8/2N7
Connector
Screws