Displaying Fuser Heater Temperature; Turning All Leds On - Kyocera TASKalfa 6501i Service Manual

Item No.
U199

Displaying fuser heater temperature

Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The fuser temperature is displayed.
Heat Roller Edge1
Heat Roller Edge2
Heat Roller Edge3
Heat Roller Center
Press Roller Center
Completion
Press the stop key.
* : The screen for selecting a maintenance mode No. is displayed.
U200

Turning all LEDs on

Description
Turn all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key.All the LEDs on the operation panel light.
4. Press the stop key. The LEDs turn off.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Display
Heat roller edge temperature (C)
Heat roller edge temperature (C)
Heat roller edge temperature (C)
Heat roller center temperature (C)
Press roller center temperature (C)
Description
Description
1-3-96
2N8/2N7