Kyocera TASKalfa 6501i Service Manual page 313

Item No.
U411 Method: [DP Auto Adj]
1. Load A4/ letter paper.
2. Press the start key to output the original for adjustment.
3. Set the output the original for adjustment and press the start key.
4. Set the output the original for adjustment on the DP face up.
5. Press the start key to scan documents.
6. Press the start key. Auto adjustment of first side starts.
7. Set the output the original for adjustment on the DP face down.
8. Press the start key to scan documents.
9. Press the start key. Auto adjustment of second side starts.
* : When automatic adjustment has normally completed, [OK] is displayed. If a problem
occurs during auto adjustment, error code is displayed and operation stops. Should this
happen, determine the details of the problem and repeat the procedure from the begin-
ning.
Error Codes
Codes
01
02
03
03
04
05
06
07
08
09
0a
0b
0c
0d
0e
0f
10
11
12
13
14
Black band detection error (scanner auxiliary scanning direction leading edge
skew )
Black band detection error (scanner main scanning direction far end skew)
Black band detection error (scanner main scanning direction near end skew)
Black band detection error (scanner auxiliary scanning direction trailing edge
skew)
Black band is not detected (scanner auxiliary scanning direction leading edge)
Black band is not detected (scanner main scanning direction far end)
Black band is not detected (scanner main scanning direction near end)
Black band is not detected (scanner auxiliary scanning direction trailing edge)
Black band is not detected (DP main scanning direction far end)
Black band is not detected (DP main scanning direction near end)
Black band is not detected (DP auxiliary scanning direction leading edge)
Black band is not detected (DP auxiliary scanning direction leading edge origi-
nal check)
Black band is not detected (DP auxiliary scanning direction trailing edge)
White band is not detected (DP auxiliary scanning direction trailing edge)
DMA time out
Auxiliary scanning direction magnification error
Auxiliary scanning direction leading edge error
Auxiliary scanning direction trailing edge error
DP uxiliary scanning direction skew error
Maintenance request error
Main scanning direction center line error
Description
Description
1-3-159
2N8/2N7-3