Kyocera TASKalfa 6501i Service Manual page 662

5. Pull the bridge conveying unit out.
6. Remove the screw.
7. Slide the bridge conveying unit and
then remove the unit from the hooks of
the slide rails.
8. Remove five screws.
9. Remove two magnet catches.
10. Unhook two hooks and then remove the
inner upper cover.
Bridge
conveying unit
Slide rails
Inner upper
cover
Screw
Screw
Hook
1-5-50
Screw
Figure 1-5-84
Magnet catch
Screws
Hook
Figure 1-5-85
2N8/2N7