Detaching And Refitting The Isu Right Cover And Right Upper Cover - Kyocera TASKalfa 6501i Service Manual

(8) Detaching and refitting the ISU right cover and right upper cover

Procedure
1. Remove two screws and then remove
the ISU right cover.
2. Remove the clip holder A.
3. Remove the screw and then remove
the clip holder B.
4. Unhook three hooks and then remove
the right upper cover.
5. Remove the screw.
6. Unhook three hooks and then remove
the right middle cover.
Clip
Screws
holder A
Screw
Clip
holder B
1-5-9
ISU right cover
Right
upper cover
Figure 1-5-13
Right middle
rear cover
Figure 1-5-14
2N8/2N7
Screw