Installing The Coin Vender (Option For Japan Only) - Kyocera TASKalfa 6501i Service Manual

1-2-6 Installing the coin vender (option for japan only)

Coin vender installation requires the following parts:
Parts
Coin vender
Vender wire
Vender base
M4 x 6 screw
Ferrite core
Clamp
Vender signal cable
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Fit the vender base to coin vender
using four M4 x 6 screws.
Quantity Part.No.
1 1905H99JP0 (option)
1
1
Supplied with
4
coin vender
1
1
1 302K946AE0
M4 x 6 screws
M4 x 6 screws
1-2-66
Coin vender
Vender base
Figure 1-2-98
2N8/2N7