Moving The Machine - Kyocera TASKalfa 6501i Service Manual

Moving the machine

When moving the machine, pull out the carrying handle, and move with the carrying handle and three hand-
holds.
*: Use the handhold at the right front only
for lifting the machine.
Use the handhold on the right side only
for carrying the machine by lifting it up.
(Do not incline the machine for more than
30 degrees.)
*: Do not use the handhold at the right front
to pull the machine around.
Do not use the right-side handhold to
move the machine horizontally on the
floor. (To prevent deformation due to hori-
zontal stress)
Handhold
Handhold
Figure 1-2-2
<Allowable angle of the right
front handhold positions>
Figure 1-2-3
1-2-4
Carrying handle
(Handhold
at the right front)
The handhold at the right front side
must be lifted only upward at an
angle of 30 degrees back and forth.
Do not use the handhold to incline
or move the machine sideways.
Allowable range
(±30degree front and backwards)
Position of the handhold seen
from the right side of the machine
2N8/2N7
Handhold