Kyocera TASKalfa 6501i Service Manual page 18

Item
Lower left
tray
Output tray Upper left
capacity tray
Right tray
Light source
Scanning system
Photoconductor
Image write system
Charging system
Developing system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
Memory
Hard Disk
Standard
Interface
Option
Temperature 10 to 32.5 °C/ 50 to 90.5 °F
Humidity
Operating
environment
Altitude
Brightness
Dimensions Machine
(W × D × H)
only
Space required (W × D)
65 ppm
275 sheets (64 g/m )
2
250 sheets (80 g/m )
2
110 sheets (64 g/m )
2
100 sheets (80 g/m )
2
70 sheets (64 g/m )
2
70 sheets (80 g/m )
2
LED
Flat bed scanning by CCD image sensor
a-Si (drum diameter 40 mm)
Semiconductor laser
Charger roller
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container and toner hopper
Belt + roller
Small diameter separation, Separation electrode
Drum: Counter blade, Cleaning roller
Transfer belt: Fur brush
Exposure by cleaning lamp (LED)
Single-axle belt support fusing system
Heat source: IH (belt), Halogen heater (press roller)
Abnormally high temperature protection devices: thermostat
Freescale QorIQ P1022 (Dual Core) 1067MHz
3GB
160 GB or more
USB Interface Connector: 1 (USB Hi-Speed)
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T)
USB Port: 4 (Hi-Speed USB)
Fax (e-KUIO): 2
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T)
A maximum of two interface options can be installed.
Only one network interface can be installed.
When a network interface is installed, only one fax line can be installed.
15 to 80% RH
2,500 m/ 8,202 ft or less
1,500 lux or less
1039 × 801 × 1347 mm
40 57/64 × 31 17/32 × 53 1/64"
1039 × 801 mm (using MP tray)
40 57/64 × 31 17/32" (using MP tray)
1-1-2
Specifications
2N8/2N7
80 ppm