Installing The Key Card Mk-2 (Option For Japan Only) - Kyocera TASKalfa 6501i Service Manual

1-2-4 Installing the key card MK-2 (option for Japan only)

Key card installation requires the following parts:
Parts
Key card MK-2
MK-2 mount
M4 x 16 screw
Tray mount set
Supplied parts of tray mount set (302LF94291):
Parts
Tray cover
Tray mount
Tray film
M4 x 20 tap-tight S screw
M4 x 8 tap-tight S screw
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Remove nine screws and then remove
the rear upper cover.
*: To fix a cover, insert the hook at the left
top first by bowing the cover.
Quantity Part.No.
1 8J272002 (option)
1
Supplied with MK-2
2
1 302LF94291
Quantity Part.No.
1 302LC04600
1
2
4 7BB100420H
2 7BB700408H
Hook
Screws
Screws
1-2-47
-
-
Rear upper
cover
Screws
Screws
Figure 1-2-73
2N8/2N7-1