Enabling Ic Card Authentication - Kyocera TASKalfa 6501i Service Manual

16. Fix the right table cover by using the
screw which was removed in step 2.
*: Use care not to pinch the wire.

Enabling IC Card Authentication

Precautions
To install the optional function, you need the License Key. Please access the designated website of your
dealer or service representative, and register "Machine No." indicated on your machine and "Product ID" indi-
cated on the License Certificate supplied with the product to issue the License Key.
1. Turn the main power switch on.
2. Press the System Menu key and then press [System].
If user login administration is disabled, the user authentication screen appears.
Enter your login user name and password and then press [Login]. For this, you need to log in with admin-
istrator privileges.
3. Press [Next] of Optional Function.
4. Select CARD AUTHENTICATION KIT(B) and press [Activate].
5. The License Key entry screen is displayed.
Enter the License Key using the numeric keys and press [Official].
6. Confirm the product name CARD AUTHENTICATION KIT(B) and press [Yes].
7. To use a SSFC card, run maintenance mode U222 and set SSFC.
*: When the machine has entered sleep mode with Energy Saver ON, IC cards can not be recognized by
the Card reader, since it does not wake from sleep mode. To enable the IC Card Reader in Sleep Mode,
refer to the Operation Guide to change the Sleep level to OFF in the Sleep Rules at the Date/ Timer/
Energy Saver section of the System Menu.
*: This setting is not necessary when the optional network interface kit is installed.
Right table cover
Figure 1-2-138
1-2-93
2N8/2N7
Screw