Installing The Stoppers; Installing The Cassette Heater (Option) - Kyocera TASKalfa 6501i Service Manual

Hide thumbs Also See for TASKalfa 6501i:

Table of Contents

Installing the stoppers

The above is not required when an optional

document finisher or the side feeder has

been installed.

1. Fix the stoppers with two screws at the

bottom right of the device.

*: Use the upper screw holes.

*: Turn the adjusters on each corner until

they reach the floor and then secure the

1. Install the optional cassette heater as

necessary (see page 1-2-72).

Figure 1-2-51

Figure 1-2-52

Show Quick Links

Table of Contents

Taskalfa 8001i