Telnet Console - Moxa Technologies MiiNePort E2-H User Manual

MiiNePort E2/E3
After issuing this command, a Connect failed message will appear. After the module reboots, its IP address
will be updated to the new address, and you can reconnect the module using the utility, web, or Telnet console
to verify that the update was successful.

Telnet Console

Depending on how your computer and network are configured, you may find it convenient to use network
access to set up your module's IP address. This can be done using Telnet, which requires that the module has
a network connection and an IP address.
1. From the Windows desktop, click Start and then select Run.
2. Telnet to the module's current IP address. If this is the first time configuring the module, you will telnet to
the default IP address by typing telnet 192.168.127.254 in the Open text box. Click OK to proceed.
You will be asked to enter a password to access to the device. The default password for MiiNePort E2/E3 is
moxa.
3. Select Network settings by pressing 0 and then press Enter.
Initial IP Address Configuration
5-3