Moxa Technologies MiiNePort E2-H User Manual page 68

MiiNePort E2/E3
Up to four Destination IP addresses (or domain names) can be specified. The MiiNePort will be able to
actively connect to each of these remote addresses.
ATTENTION
The connection speed or throughput may be slow if one of the four connections is slow, since the one slow
connection will slow down the other three connections.
ATTENTION
Both IP address and Domain Name can be used in the Destination IP address field.
Designated Local Port 1/2/3/4
Setting
TCP Port No.
Connection control
Setting
Startup/None, Any Character/None,
Any Character/Inactivity Time,
DSR ON/DSR OFF, DSR ON/None,
DCD ON/DCD OFF, DCD ON/None
The meaning of each of the above settings is given in the following table. In general, both the Connect condition
and Disconnect condition are given.
Connect/Disconnect
Startup / None
(default)
Any Character / None
Any Character / Inactivity
Time
DSR On / DSR Off
DSR On / None
DCD On / DCD Off
DCD On / None
Factory Default
5011 (Port 1)
5012 (Port 2)
5013 (Port 3)
5014 (Port 4)
Factory Default
Startup/None
Description
A TCP connection will be established on startup and will remain active indefinitely.
A TCP connection will be established when any character is received from the serial
interface and will remain active indefinitely.
A TCP connection will be established when any character is received from the serial
interface and will be disconnected when the Inactivity time out is reached.
A TCP connection will be established when a DSR "On" signal is received and will be
disconnected when a DSR "Off" signal is received.
A TCP connection will be established when a DSR "On" signal is received and will
remain active indefinitely.
A TCP connection will be established when a DCD "On" signal is received and will be
disconnected when a DCD "Off" signal is received.
A TCP connection will be established when a DCD "On" signal is received and will
remain active indefinitely.
7-19
Web Console Configuration
Necessity
Required
Necessity
Required