Moxa Technologies MiiNePort E2-H User Manual page 99

MiiNePort E2/E3
Baudrate
Command code: SB
Command parameters: Port index.
Reply parameters: MiiNePort's Baudrate.
?GSB1
!GSB0115200
Data bits
Command code: SD
Command parameters: Port index.
Reply parameters: MiiNePort's Data bits.
?GSD1
!GSD08
Stop bits
Command code: SS
Command parameters: Port index.
Reply parameters: MiiNePort's stop bits index.
Stop Bits Index Table:
0 Stop bits is 1
1 Stop bits is 1.5
2 Stop bits is 2
?GSS1
!GSS00
Parity
Command code: SP
Command parameters: Port index.
Reply parameters: MiiNePort's Parity index as follows.
0 None
1 Odd
2 Even
3 Mark
4 Space
?GSP1
!GSP00
Introduction to SCM (Serial Command Mode) Command Set
System requests port 1's Baudrate for this MiiNePort.
MiiNePort reports Baudrate as '115200'.
System requests port 1's Data bits for this MiiNePort.
MiiNePort reports Data bits as '8'.
System requests port 1's Stop bits for this MiiNePort.
MiiNePort reports Stop bits as '1'.
System requests port 1's Parity for this MiiNePort.
MiiNePort reports Parity as 'None'.
A-7