Nport Windows Driver Manager; Installing Nport Windows Driver Manager - Moxa Technologies MiiNePort E2-H User Manual

MiiNePort E2/E3
3. When the search is complete, all MiiNePort modules that were located will be displayed in the Device Search
Utility window.
4. To modify the configuration of the highlighted MiiNePort, click the Console icon to open the web console.
This will take you to the web console, where you can make configuration changes. Refer to Chapter 7:
Web Console Configuration for information on how to use the web console.
ATTENTION
If you are looking for information related to TCP Server, TCP Client, Ethernet Modem, RFC2217, or UDP
modes, you can ignore the following Driver sections, including NPort Windows Driver Manager and Linux Real
TTY Driver, and instead jump directly to Chapter 7: Web Console Configuration for additional settings.

NPort Windows Driver Manager

Installing NPort Windows Driver Manager

The NPort Windows Driver Manager is intended for use with serial ports that are set to Real COM mode. The
software manages the installation of drivers that allow you to map unused COM ports on your PC to your device
through the MiiNePort's serial port. When the drivers are installed and configured, devices that are embedded
with the MiiNePort will be treated as if they are attached to your PC's own COM ports.
1. Click the INSTALL COM Driver button in the MiiNePort Installation CD to install the NPort Windows Driver.
Once the installation program starts running, click Yes to proceed.
2. Click Next when the Welcome screen opens to proceed with the installation.
Utility Console and Driver Installation
6-5