Usb Console Configuration (115200, None, 8, 1, Vt100) - Moxa Technologies PT-G503-PHR-PTP-HV User Manual

PRP/HSR Redundancy Box
USB Console Configuration (115200, None, 8, 1,
VT100)
NOTE • You cannot connect to the USB console and command line interface at the same time.
• You can connect to the web console and another console (serial or Telnet) at the same time. However, we
strongly recommend that you do NOT do so. Following this advice will allow you to maintain better control
over the Moxa PRP/HSR RedBox's configuration.
NOTE We recommend using PComm Terminal Emulator when opening the USB console. This software can be
downloaded free of charge from the Moxa website.
Before running PComm Terminal Emulator, install the USB console driver on your PC and then connect the
Moxa PRP/HSR RedBox's USB console port to your PC's COM port (generally COM1 or COM2, depending on how
your system is set up) with USB to DB9-F (or RJ45 to DB25-F) cable.
After installing PComm Terminal Emulator, open the Moxa PRP/HSR RedBox's USB console as follows:
1. From the Windows desktop, click Start  All Programs  PComm Lite Ver1.6  PComm Terminal
Emulator.
2. Select Open under the Port Manager menu to open a new connection.
2-2
Getting Started